Monster Hunter: World is an action-packed game that requires quick reflexes and precision to take down the fearsome beasts that roam the New World. However, to fully immerse yourself in the game’s fast-paced combat, a smooth 60 frames per second (FPS) experience is essential. But, achieving this coveted frame rate can be a challenge, especially for those with lower-end hardware. Fear not, hunters! In this article, we’ll dive deep into the optimal settings, tweaks, and hardware recommendations to help you unlock a seamless 60 FPS experience in Monster Hunter: World.
Understanding The Importance Of FPS In Monster Hunter: World
Before we dive into the optimization process, it’s essential to understand why a high frame rate is crucial in Monster Hunter: World. The game’s combat mechanics are designed around quick movements, precise dodging, and timely attacks. A low frame rate can lead to:
- Increased latency: Delayed responses to your inputs can make it difficult to dodge attacks or land critical hits.
- Reduced accuracy: A lower frame rate can make it challenging to aim and track your target, especially during high-speed battles.
- Decreased immersion: Choppy gameplay can break the illusion of being in the game world, pulling you out of the immersive experience.
A smooth 60 FPS experience, on the other hand, provides:
- Improved responsiveness: Instantaneous feedback to your inputs, allowing for more precise and effective combat tactics.
- Enhanced accuracy: A higher frame rate enables you to track and aim at your targets with greater ease, leading to more successful hunts.
- Increased immersion: Seamless gameplay creates a more engaging and realistic experience, drawing you deeper into the world of Monster Hunter: World.
Optimizing Your Graphics Settings For 60 FPS
To achieve 60 FPS in Monster Hunter: World, you’ll need to balance your graphics settings with your hardware capabilities. Here are some tweaks to get you started:
Resolution And Graphics Quality
- Resolution: Lowering your resolution can significantly improve performance. Try reducing it to 1080p (1920×1080) or 900p (1600×900) if you’re struggling to reach 60 FPS at higher resolutions.
- Graphics Quality: Turn down the graphics quality settings to prioritize performance. You can start by reducing the graphics quality to “High” or “Medium” and adjusting further as needed.
Texture And Shadow Quality
- Texture Quality: Reduce the texture quality to “High” or “Medium” to alleviate the strain on your GPU. This will improve performance without sacrificing too much visual fidelity.
- Shadow Quality: Turn down the shadow quality to reduce the load on your GPU. You can opt for “Low” or “Off” if you’re struggling to maintain 60 FPS.
Anti-Aliasing And Motion Blur
- Anti-Aliasing: Disable or reduce anti-aliasing to minimize the performance impact. You can try using temporal anti-aliasing (TAA) instead of the more intensive MSAA (Multisample Anti-Aliasing).
- Motion Blur: Disable motion blur to improve performance. This feature can be taxing on your GPU, especially during fast-paced combat.
Volumetric Lighting And Hairworks
- Volumetric Lighting: Turn down or disable volumetric lighting to reduce the load on your GPU. This feature can be computationally intensive, especially in areas with dense foliage.
- Hairworks: Disable Hairworks to improve performance. This feature is resource-intensive and can impact frame rates, especially during battles with large monsters.
Hardware Recommendations For 60 FPS In Monster Hunter: World
While tweaking your graphics settings can help, having the right hardware is essential for maintaining a smooth 60 FPS experience in Monster Hunter: World. Here are some recommendations:
GPU
- NVIDIA GeForce: A mid-to-high-end NVIDIA GeForce GPU such as the GTX 1660 Super, RTX 2060, or RTX 2070 is recommended for 60 FPS at 1080p.
- AMD Radeon: A mid-to-high-end AMD Radeon GPU such as the RX 5600 XT, RX 5700 XT, or RX 6800 XT is recommended for 60 FPS at 1080p.
CPU
- AMD Ryzen: A mid-to-high-end AMD Ryzen CPU such as the Ryzen 5 5600X, Ryzen 7 5800X, or Ryzen 9 5900X is recommended for 60 FPS at 1080p.
- Intel Core: A mid-to-high-end Intel Core CPU such as the Core i5-11600K, Core i7-11700K, or Core i9-11900K is recommended for 60 FPS at 1080p.
RAM And Storage
- RAM: Ensure you have at least 16 GB of DDR4 RAM, with a speed of 3000 MHz or higher.
- Storage: Use an NVMe SSD with a high read and write speed (such as the Samsung 970 EVO or WD Black SN750) to reduce loading times and improve overall performance.
Additional Tips For Achieving 60 FPS In Monster Hunter: World
In addition to optimizing your graphics settings and having the right hardware, here are some additional tips to help you reach 60 FPS in Monster Hunter: World:
Close Unnecessary Programs
Close any unnecessary programs or background applications to free up system resources and improve performance.
Update Your Drivers
Ensure your GPU drivers are up-to-date, as outdated drivers can negatively impact performance.
Monitor Settings
Adjust your monitor settings to prioritize performance. You can try reducing the refresh rate or turning off G-Sync or FreeSync if you’re experiencing performance issues.
Cap Your Frame Rate
Capping your frame rate at 60 FPS can help prevent fps spikes and ensure a smoother experience. You can use the in-game frame rate cap or third-party software like FRAPS or Rivatuner Statistics Server.
Experiment With Different Settings
Experiment with different graphics settings and tweaks to find the perfect balance for your hardware. You may need to make compromises on visual fidelity to achieve a smooth 60 FPS experience.
In conclusion, achieving 60 FPS in Monster Hunter: World requires a combination of optimized graphics settings, suitable hardware, and attention to detail. By following the tips and recommendations outlined in this article, you’ll be well on your way to a seamless and immersive hunting experience. Remember to experiment with different settings, update your drivers, and close unnecessary programs to ensure the best possible performance. Happy hunting!
What Are The System Requirements For Playing Monster Hunter: World At 60 FPS?
To play Monster Hunter: World at 60 FPS, you’ll need a relatively powerful gaming PC. The minimum system requirements for playing the game at 60 FPS include an Intel Core i5-3470 or AMD FX 6300 processor, 8 GB of RAM, and an NVIDIA GeForce GTX 1060 or AMD Radeon RX 580 graphics card. However, to achieve a consistent 60 FPS, it’s recommended to have a more powerful PC with a processor like the Intel Core i7-3770 or AMD FX 8350, 16 GB of RAM, and a graphics card like the NVIDIA GeForce GTX 1070 or AMD Radeon RX 590.
Keep in mind that these are general guidelines, and the actual system requirements may vary depending on your setup and the in-game settings you choose. If you’re unsure whether your PC can handle the game at 60 FPS, you can check the game’s system requirements on the Steam store page or the official Monster Hunter: World website.
What Graphics Settings Should I Adjust To Achieve 60 FPS In Monster Hunter: World?
To achieve 60 FPS in Monster Hunter: World, you’ll need to adjust several graphics settings to reduce the strain on your graphics card. The most important settings to adjust are the resolution, frame rate cap, and graphics quality. Try reducing the resolution to 1080p or 1440p, capping the frame rate at 60 FPS, and setting the graphics quality to “High” or “Medium”. You can also try adjusting the shadow quality, texture quality, and anti-aliasing settings to reduce the load on your graphics card.
Additionally, you can try enabling or disabling certain graphics features like volumetric rendering, depth of field, and ambient occlusion to see if they improve performance. It’s also a good idea to disable any unnecessary graphics features like motion blur and screen space ambient occlusion. Experiment with different settings to find the right balance between performance and visuals for your PC.
Can I Use A Graphics Card With Less VRAM To Play Monster Hunter: World At 60 FPS?
While it’s technically possible to play Monster Hunter: World with a graphics card that has less VRAM, it’s not recommended if you want to achieve a consistent 60 FPS. The game requires a significant amount of VRAM to load and render its detailed textures and graphics, so using a graphics card with less VRAM may result in poor performance and frequent framerate drops.
If you’re using a graphics card with less VRAM, you may need to reduce the resolution and graphics quality even further to compensate. However, this may compromise the overall visual quality of the game. If possible, it’s recommended to use a graphics card with at least 6 GB of VRAM to ensure a smooth and consistent 60 FPS experience.
Will Adjusting My Monitor’s Refresh Rate Help Me Achieve 60 FPS In Monster Hunter: World?
Adjusting your monitor’s refresh rate can help you achieve a higher frame rate in Monster Hunter: World, but it’s not a guarantee. If your monitor has a high refresh rate like 144 Hz or 240 Hz, you may be able to take advantage of higher frame rates in the game. However, if your PC can’t handle the game at high frame rates, adjusting the refresh rate won’t make a significant difference.
To take advantage of higher refresh rates, you’ll need a powerful PC that can handle the game at high frame rates. You’ll also need to enable the “Variable Refresh Rate” or “G-Sync” option in the game’s graphics settings, depending on your monitor and graphics card. This will allow the game to synchronize its frame rate with your monitor’s refresh rate, reducing screen tearing and stuttering.
Can I Use A Console Controller To Play Monster Hunter: World On PC?
Yes, you can use a console controller to play Monster Hunter: World on PC. The game supports a wide range of controllers, including the Xbox 360 controller, Xbox One controller, and DualShock 4 controller. To use a controller, simply connect it to your PC and enable controller support in the game’s options menu.
Keep in mind that using a controller may affect your performance in the game, especially if you’re used to playing with a keyboard and mouse. You may need to adjust the controller settings and button mappings to suit your playstyle. Additionally, some players may prefer to use a keyboard and mouse for certain actions like movement and camera control.
Will Disabling Certain Graphics Features Improve Performance In Monster Hunter: World?
Yes, disabling certain graphics features can improve performance in Monster Hunter: World. The game has several graphics features that can be disabled or adjusted to reduce the load on your graphics card. For example, you can disable features like volumetric rendering, depth of field, and ambient occlusion to improve performance.
Disabling these features can help improve frame rates, especially in areas with high graphics intensity. However, keep in mind that disabling these features may compromise the overall visual quality of the game. Experiment with different settings to find the right balance between performance and visuals for your PC.
Can I Use Mods To Improve Performance In Monster Hunter: World?
Yes, you can use mods to improve performance in Monster Hunter: World. The game has a thriving modding community, with many mods available that can improve performance, graphics, and gameplay. Some mods can help reduce the game’s memory usage, improve frame rates, and fix graphical issues.
However, be cautious when installing mods, as they can also cause stability issues or conflict with other mods. Make sure to only install mods from trusted sources, and follow the installation instructions carefully. Additionally, be aware that using mods may void your game’s warranty or violate its terms of service.