How to Fix the Power Supply on My Samsung TV: A Handy Guide

If you’re facing power supply issues with your Samsung TV, you’ve come to the right place. We understand how frustrating it can be when your TV won’t turn on or experiences intermittent power problems. In this handy guide, we will provide you with step-by-step instructions on how to fix the power supply on your Samsung TV, helping you restore its functionality and get back to enjoying your favorite shows and movies in no time.

Identifying Common Power Supply Issues In Samsung TVs

Power supply issues are a common problem encountered by Samsung TV owners. The first step in fixing these issues is to identify the problem accurately. There are a few common power supply issues that may arise in Samsung TVs.

how to fix the power supply on my samsung tv

One common issue is a complete lack of power, where the TV does not turn on at all. This could be caused by a faulty power cord, a blown fuse, or a defective power outlet. Another common issue is the TV turning on and off by itself or not staying on for long durations. This might indicate a faulty power supply board or internal component.

Visual cues can also help identify power supply issues. If there are visible burn marks or a pungent smell coming from the TV, it is likely that there is a problem with the power supply unit. Additionally, if the TV screen flickers or displays abnormal colors, it could be due to power supply problems.

Identifying the specific power supply issue is crucial in order to apply the appropriate troubleshooting steps.

Resetting The Power Supply Settings On Your Samsung TV

When faced with power supply issues on your Samsung TV, one of the first steps you can take is resetting the power supply settings. This simple troubleshooting method can often resolve minor glitches and restore the normal functioning of your TV.

To reset the power supply settings, start by unplugging your TV from the power outlet. Leave it unplugged for at least a minute, allowing any residual power to discharge. While the TV is disconnected, press and hold the power button on the TV itself for around 10 seconds. This will help drain any remaining electricity.

Afterward, plug your TV back into the power outlet and turn it on using the power button on the TV or the remote control. By performing these steps, you will effectively reset the power supply settings and clear any temporary issues that might have caused the problem.

If your Samsung TV continues to experience power supply issues despite resetting the settings, it may be necessary to explore other troubleshooting methods or seek professional help.

Checking And Replacing Power Cables And Connections

When it comes to power supply issues on your Samsung TV, one of the first things you should check is the power cables and connections. Faulty or loose connections can lead to power supply problems and a non-functional TV.

Start by inspecting the power cable for any signs of damage, such as frayed wires or bent pins. If you notice any issues, it’s best to replace the cable altogether to ensure a reliable connection. Additionally, make sure the power cable is firmly plugged into both the TV and the power outlet.

Next, check the connections between the power supply and other components of the TV. Ensure that all cables are securely plugged in and that there are no loose connections. If you find any loose cables, gently push them back into place.

In some cases, the issue may be with the power socket itself. Try plugging the TV into a different power outlet to rule out any problems with the socket.

By thoroughly checking and replacing power cables and connections, you can potentially resolve power supply issues on your Samsung TV and get it up and running again.

Troubleshooting Issues With The Power Adapter Or Power Cord

When it comes to power supply problems in your Samsung TV, issues with the power adapter or power cord can often be the culprit. If you’re experiencing power-related issues, it’s essential to troubleshoot these components to ensure they are functioning correctly.

Firstly, check the power adapter for any signs of damage or wear. Look for frayed cables, bent pins, or loose connections. If you notice any issues, it may be necessary to replace the power adapter.

Similarly, inspect the power cord for any visible damage. Ensure it is securely connected to both the TV and the power outlet. If the cord appears damaged or worn, consider replacing it with a new one.

In some cases, power supply problems can be resolved by simply unplugging the TV and power adapter from the outlet and waiting for a few minutes before plugging them back in. This can help to reset any temporary glitches.

If troubleshooting the power adapter and power cord does not resolve the issue, it’s recommended to move on to other troubleshooting techniques or seek professional help.

Repairing Or Replacing Faulty Capacitors In The Power Supply Unit

When your Samsung TV experiences power supply issues such as not turning on, random shut-offs, or flickering screen, faulty capacitors in the power supply unit might be the culprit. Capacitors are essential components that help regulate voltage and provide stability to the power supply.

To repair or replace faulty capacitors, you will need to open your TV’s back panel and locate the power supply unit. Capacitors are usually cylindrical in shape and have a flat top. Inspect each capacitor carefully for any signs of bulging, leaking, or a popped top. If you find any capacitors in such condition, they need to be replaced.

Replacing capacitors requires some soldering skills and tools, so if you don’t have experience with electronics, it’s best to contact a professional technician. However, if you’re confident in your abilities, you can purchase replacement capacitors from electronic stores or online retailers. Make sure to choose capacitors with the same specifications as the faulty ones, including capacitance, voltage, and temperature ratings.

Once you have the replacement capacitors, desolder the faulty ones, and solder the new ones in their place. Take extra care not to damage the circuit board during the process. After replacing the capacitors, reassemble the TV and test it to see if the power supply issues have been resolved.

Resetting Or Updating The Firmware To Resolve Power Supply Problems

To fix power supply issues on your Samsung TV, one effective troubleshooting method is resetting or updating the firmware. Firmware is the software that controls and manages the hardware components of your TV, including the power supply. Over time, firmware bugs or glitches may occur, leading to power supply problems.

To reset the firmware, start by turning off your TV and unplugging it from the power source. Then, press and hold the power button on the TV for about 10 seconds to discharge any residual power. After this, plug your TV back in and turn it on. This process will help reset the firmware settings and may resolve power supply issues.

Updating the firmware is another option. Visit the Samsung support website and search for the model of your TV. Look for firmware updates and follow the instructions provided to download and install the latest version. Firmware updates often include fixes for known issues, including power supply problems.

Remember to backup your settings and personal data before updating the firmware as it may reset them to default values. If after attempting these steps the power supply issues persist, it may be necessary to seek professional help.

Seeking Professional Help For Complex Power Supply Issues In Samsung TVs

If you have exhausted all the troubleshooting steps mentioned in the previous subheadings and are still experiencing power supply issues with your Samsung TV, it may be time to seek professional assistance. Complex power supply issues can be challenging to fix without specialized knowledge and equipment.

Professional technicians who specialize in TV repairs will have the expertise to diagnose and resolve complex power supply problems. They have access to advanced tools and replacement parts that may be required to fix the issue effectively. Additionally, they can perform thorough inspections to identify any other underlying problems that may be contributing to the power supply issue.

When choosing a professional repair service, make sure to do your research and select a reputable and experienced provider. Look for online reviews and recommendations from friends or family. Inquire about their relevant experience in fixing Samsung TVs and their knowledge of power supply issues specifically.

While seeking professional help may incur additional costs, it is often the best solution for complex power supply issues, ensuring that your Samsung TV is repaired correctly and functions properly in the long run.


1. Why is my Samsung TV not turning on?

There can be several reasons why your Samsung TV is not turning on. It could be due to a faulty power supply, a power surge, a loose power cord connection, or a malfunctioning remote control. To fix this, you can try unplugging the TV, checking the power cord for any damages, replacing the batteries in the remote control, or resetting the power supply.

2. How do I reset the power supply on my Samsung TV?

To reset the power supply on your Samsung TV, start by unplugging the TV from the power outlet. While the TV is unplugged, press and hold the power button on the TV for about 10 seconds. Release the power button and plug the TV back into the power outlet. Finally, try turning on the TV again to see if the power supply has been successfully reset.

3. What should I do if my Samsung TV keeps turning off by itself?

If your Samsung TV keeps turning off by itself, it could be an issue with the power supply. First, check if the power cord is securely connected to both the TV and the power outlet. If it is, try plugging the TV into a different power outlet to rule out any issues with the current outlet. Additionally, make sure that the sleep timer or auto shut-off settings are not enabled on your TV.

4. Can I replace the power supply in my Samsung TV myself?

While it is technically possible to replace the power supply in your Samsung TV yourself, it is recommended to seek professional assistance. The power supply unit in a TV contains high voltage components and making a mistake during the replacement process can damage your TV or pose a risk to your safety. It is best to contact Samsung customer support or a reputable TV repair technician for assistance with replacing the power supply.

Final Words

In conclusion, fixing the power supply on a Samsung TV can be a straightforward process by following a few simple steps. First, it is important to verify if the issue lies with the power supply by testing the outlet and cables. Next, consider checking the fuse or replacing it if necessary. If these steps do not fix the problem, seeking professional help or contacting Samsung customer support may be the best course of action. By following these guidelines, users can resolve power supply issues and enjoy uninterrupted viewing on their Samsung TVs.

Leave a Comment